reinforcing bars การใช้

• First, the location of existing reinforcing bar is determined using magnetic techniques.
• Make a hole by driving a steel reinforcing bar through the wall.
• It can only be made into something like reinforcing bars for construction.
• The billets are then rolled into concrete reinforcing bars, or rebars.
• Reinforcing bars are normally round in cross-section and vary in diameter.
• The main reinforcing bar had plain steel beam members rigidly attached to it.
• This diagonal tension fractured the reinforcing bar beams since the adhesion was broken.
• The mass density of the reinforcing bars is 7800 kg / m 3.
• The ironworker s work pliers is the main tool of a reinforcing bar ironworker.
• A network of horizontal and vertical reinforcing bars is then attached to these protrusions.
• The hoops are designed to prevent the vertical steel reinforcing bars from buckling outward.
• They can be stacked, braced and filled with steel reinforcing bars and then concrete.
• Often, builders of reinforced concrete structures know, from experience, where to put reinforcing bars.
• The builder will also need eight-inch-diameter cardboard forms, premixed concrete, reinforcing bars and J-bolts.
• Pacific Steel employs 172 people and is New Zealand's only producer of reinforcing bar.
• Reinforcing bars ( for concrete ) were produced here.
• In the aftermath of the incident, steps were taken to remedy the missing reinforcing bars.
• -- Remove all the concrete and lay a new slab, with reinforcing bars or mesh.
• The company's main business was making steel reinforcing bars and trucking steel columns and girders.
• The exterior columns and beams are concrete encased steel wide flanges surrounded by reinforcing bars.